Directions for Use
Motocross Bikes, ATVs, UTVs, Trucks, Cars, Motorcycles, Bicycles, Boats and more.
• Slick Offroad Wash® breaks down the adhesion of dirt and mud for easy removal.
• Solution will not damage paint, plastic, metals, or bearings when used as directed.
• Slick Offroad Wash® is NOT a degreaser.
• Apply Slick Offroad Wash® directly to dirty or muddy surfaces.
• Do not wash surface with water prior to applying Slick Offroad Wash®
Results may vary for conditions including, but not limited to extreme weather, and heavy amounts of mud. Scrubbing may be required.
_thumb.png)
STEP 1:
Slick Offroad Wash® Super concentrate MUST be diluted with water prior to use. Each 6 oz. packet mixes with 1 Gallon of water for proper ready-to-use solution.
We highly recommend the Slick 1 Gallon Applicator to apply the solution and evenly saturate the vehicle while reducing waste. Fill the sprayer with (1) Gallon of water before pouring in (1) 6oz packet of Slick Super Concentrate, to help reduce suds. If a larger sprayer is used, please refer to the dilution ratio chart. - 6oz Slick Offroad Wash Concentrate : 1 Gallon Water
Slick Offroad Wash® Super concentrate MUST be diluted with water prior to use. Each 6 oz. packet mixes with 1 Gallon of water for proper ready-to-use solution.
We highly recommend the Slick 1 Gallon Applicator to apply the solution and evenly saturate the vehicle while reducing waste. Fill the sprayer with (1) Gallon of water before pouring in (1) 6oz packet of Slick Super Concentrate, to help reduce suds. If a larger sprayer is used, please refer to the dilution ratio chart. - 6oz Slick Offroad Wash Concentrate : 1 Gallon Water
STEP 2:
Before applying the solution, remove any thick or heavy mud using a scraper. Spray solution evenly over all dirty surfaces using an ample amount to fully saturate the mud or dirt. Allow the product to soak 3-5 minutes. It is recommended that you apply in the shade or mist the vehicle to prevent solution from drying.
In some cases, using a scrub brush to agitate the surface may be required.
Before applying the solution, remove any thick or heavy mud using a scraper. Spray solution evenly over all dirty surfaces using an ample amount to fully saturate the mud or dirt. Allow the product to soak 3-5 minutes. It is recommended that you apply in the shade or mist the vehicle to prevent solution from drying.
In some cases, using a scrub brush to agitate the surface may be required.
STEP 3:
It is recommended to use a high-pressure spray nozzle attached to a garden hose. Using a scrub brush while spraying may be required for heavy jobs. If used properly, dirt and mud will easily wash away, leaving your vehicle clean and shiny.
After wash, dry off your vehicle with a clean towel to prevent water spots.
It is recommended to use a high-pressure spray nozzle attached to a garden hose. Using a scrub brush while spraying may be required for heavy jobs. If used properly, dirt and mud will easily wash away, leaving your vehicle clean and shiny.
After wash, dry off your vehicle with a clean towel to prevent water spots.